We are searching data for your request:
Upon completion, a link will appear to access the found materials.
How to dye cotton with natural colors: DIY dyes can help us dye wool, cotton and other natural fabrics. All the instructions for dyeing fabrics using the maceration of maple leaves and other plant varieties.
Green leaves and red maple leaves can help us dye cotton in different shades of color. THE natural colors obtained from the maceration of maple leaves ranging from green to yellow to red. We remember, for those who intenddye the cotton with natural colors, that a cotton etching step is required to permanently fix the dyes.
How to dye cotton with natural colors
Lovers of crafts and natural colors can color the cotton at home with DIY dyes. In the past we have already seen how to obtain different colors for fabrics from plant extracts. We indicate the instructions according to the desired color:
- How to dye cotton with natural colors, bright yellow.
Dye fabrics with yarrow.
- How to dye cotton with natural colors of light tones.
Tinctures from blackberry shoots.
- How to dye cotton with natural colors, gray.
Prepare a tincture with horsetail.
- How to dye cotton with natural colors, orange.
Natural henna dye.
- How to dye cotton with natural dyes of yellow, purple, lilac, purple or ruby.
How to dye fabrics at home.
- How to dye cotton of any color using the synthetic dyes available on the market.
How to color fabrics.
On this page we will see how to dye cotton with a macerate of maple leaves. Here's what it takes to color cotton.
If you use fresh maple leaves you need them in quantities equal to at least double the weight ofcottonthat you intend to dye. Weigh the cotton garment, if it weighs 300 grams you will need at least 600 grams of fresh maple leaves. In case you want to use the dried leaves (perhaps collected already fallen from the plant), you need an amount by weight equal to that of cotton, so in the case of a 300 gram T-shirt, you will need an equal amount of dried maple leaves .
For etching you will need potassium alum and cream of tartar, both in powder form. For quantities, also in this case it is necessary to estimate them in proportion to the weight of cotton to dye. For powdered potassium alum, 20% of the weight of the dry cotton to be dyed will be needed. For powdered cream of tartar, an amount equal to 6.2% of the weight of the cotton garment to be dyed will be needed. According to our 300 gram example, you need 60 grams of powdered potassium alum and 18.6 grams of powdered cream of tartar.
For the maceration, coarsely chop the leaves and leave to soak overnight in warm water. The next day, heat the concoction until it boils and keep it at temperature for about an hour. After the time has elapsed, turn off the heat and let it cool, then filter and remove the leaves.
If you have macerated with red maple, you will get a brown liquid, tending to brown. If you used green maple, the liquid obtained will be a golden yellow.
Before moving on to etching, wash the cotton garment with natural Marseille soap and hot water to remove all impurities that could hinder the fixation of the natural color. For color etching, combine the ingredients mentioned above with the cotton and perform a bath maintaining the temperature of 80 ° C for at least an hour. During this phase, remember to gently turn the dipped fabric to collect the color evenly. At the end, let the cotton cool in the dye bath, only when everything has cooled can you rinse with plenty of fresh water.
You might also be interested in
- Organic cotton jeans
- Natural fibers: what they are
- Meaning of colors: characteristics and properties