Searches

Radiant panels, all the info


Radiant panels, advantages and disadvantages.What to consider in the case of floor, wall or ceiling radiant panels. Thickness and other useful information.

THE radiant panels they are the right answer for those who want to save energy and have comfort in both winter and summer. In fact, a single system is enough to stay warm in winter and cool in summer, guaranteeing savings on the bill and the integrity of the apartment's aesthetics.

Radiant panels, What are

It is a system that passes hot water in serpentine or spiral pipes under the track through large surfaces: the most suitable installation is under the floor but there are radiant panels on the wall or ceiling.

Theradiant panel heating systemit is made up of outgoing and return pipes (coils). These coils have a minimum diameter, take up little thickness and, depending on the type, can be even a few millimeters.

Radiant panels, thickness

The thickness of such an implant is very variable. The “minimum thickness” models are suitable to be superimposed on the existing covering. They occupy a thickness of only 2 - 3 mm. Generally, a classic plant given by support and coils, occupies about 4 cm.

Radiant panels, advantages

THE radiant panels they have the advantage of being invisible, without having to compromise the aesthetics of the home. They are compatible with fireplaces, heat pump systems or boilers.

The mainadvantagesare linked to the models "On the floor", As the heat is distributed in a more compatible way to domestic comfort, avoiding the accumulation of upward heat typical of radiant ceiling panels or a wall.

Among others advantageswe point out the possibility of making the most of the spaces.

THE advantages of the radiant heating do not end! This system involves almost zero heat dispersion thanks to the good insulation of the load-bearing elements. Energy savings range from 8% up to 30% and are felt more when associated with a “smart” thermal control management system.

Uniform temperature distribution allows for lower consumption. They also guarantee excellent insulation from the noise coming from the other floors of the building. The only disadvantage is the cost.

Installation of radiant panels

THE radiant panels, built with material resistant to high temperatures and foot traffic, they can be used under the floor, in the wall and in the ceiling.

Radiant ceiling panels

THE radiant panels on the ceiling they need a false ceiling for installation, but the cost is lower, since there is no need to redo the flooring from scratch.

The radiant ceiling panels are made with pre-assembled modules that are installed adhering to the ceiling or, as mentioned above, to the false ceiling.

For all the info: radiant ceiling panels

Wall radiant panels

Another mounting option is laying in the walls and in this case a counterwall will need to be created. Based on the type of support of the coils, they can be laid on a plasterboard or with the same material as those of the underfloor heating system. Here too, you can choose prefabricated elements with pre-inserted pipes in the finishing panels.

For all the info: radiant wall panels

Baseboard radiant panels

There is also the heating system that uses the skirting board where small pipes circulate that make hot water flow.

Radiant floor panels

The installation procedure in the floor is the most used and consists in inserting an insulating material above the load-bearing slab, and then placing the pipes that will later be covered with various types of material.

The supports with or for the coils are applied above the screed, just above the layer dedicated to plumbing and electrical systems. It is clear that for installation it is necessary to break the old floor.

After placing the layer with the coils, it is possible to lay the lining.

Very thin underfloor heating systems with minimal thickness have been available for some time. These are free-standing systems, which are installed on the existing floor, without having to remove it. In this case, extra-light supports with a thickness of 2 mm are used, carpets with coils are then laid on this thickness. A self-leveling material will be laid on this thin layer, which covers and finishes the coating.

Radiant panels for heating or cooling

THE radiant panels not only do they heat up in winter, they can also cool down in summer, it will be enough to circulate cold water.

The water flowing in the coils is at a low temperature, which is why a certain saving is guaranteed. In winter, to heat the house, the water flowing in the coils has a maximum temperature of 40 ° C. In summer, to cool the house, the water has a temperature of about 10 ° C.


Video: Warmboard Radiant Panel - An Architects Review. Thirty by Forty Design Workshop (November 2021).